Enhancements:
The AV UI provides the following enhancements:
- Added new profiles: Birddog, Audio Basalte Multiroom, Audio Audio-Technica, and Kramer AV
- Added the Manual Trunk configuration option
- Added the option to configure STP priority on the Edit STP Network Redundancy pop-up page, which you can access from the Overview page
- Added a new “Port Interface Setting” configuration on the Port Configuration page
- Added a fanout configuration in on the Port Configuration > Port Interface Details page for the M4350-16V4C and M4350-40X4C models
- Added the Profile Name and Template fields to the pop-up window that displays when you point to the switch graphical display on the Overview page
- Added a pop-up window to the switch graphical display on various pages
- Added support of “CYP” and “IPMX” in video profiles
- PTP TC is now enabled by default for the Audio AES67 and Birddog profiles and is disabled by default on any other profiles that use PTP
- For pages that show the switch graphical display, the legend is now hidden by default
In addition, this release provides the following enhancements:
- Added 802.1AS Grand Master capability
- Added a non-unicast hash configuration for LAGs
- Added support of the QDP protocol packet flood in the VLAN
- Added fanout support of a 100G port to 2x50G ports on the M4350-16V4C and M4350-40X4C models
Bug Fixes:
- Fixes the issue where the switch management interfaces become slow in a stack deployment.
- Fixes the issue in the AV UI where switch crashes when you are trying to collect a tech-support file.
- Fixes the issue where an SDVoE device does not receive an IP address from the switch after the device is rebooted.
- Fixes the issue where the links do not come up for 1G and 10G connections between two switches.
- Fixes the issue where the switch crashes when multiple NETGEAR access points are connected and powered by PoE.
- Fixes the issue where the switch does not offer a lease IP address to a DHCP client after the client responds to a ping request from the switch.
- Fixes the issue where the switch reboots when you use the Q-Sys plugin.
- Fixes the issue where the AV UI displays an incorrect power usage for the SFP+ port if the highest-numbered PoE port is being used.
- Fixes the issue where the AV UI displays incorrect port statistics.
- Fixes the where issue the AV UI neighbor page shows the same IP address for all VLANs when the client device uses multiple VLANs.
- Fixes the issue where the bitrate always displays as 0 under Port Statistics.
- Fixes the issue where a parsing error occurs.
- Fixes the issue where information is not displayed for all ports.
- Fixes the issue where incorrect fiber optics information is displayed.
- Fixes the issue where a VLAN ID is not found.
- Fixes the issue where a Shure M4250 device automatically and unintendedly changes the port authentication (802.1x) mode settings when you apply the Shure Split profile.
- Fixes the issue where the Shure Designer generates an 802.1x failure when the switch is connected over an M4250 model switch.
- Fixes the issue where the neighbor table in the AV UI displays an incorrect entry for the Shure MXA Mute Button.
- Fixes the issue where you cannot power cycle a port to which a PoE++ device is connected.
- Fixes the issue where the switch generates incorrect information for a host table.
- Fixes the issue where the VLAN IP settings are lost in the AV UI.
Known Issues:
- A stack might display an “RPC - Timeout to CPU: xx:xx:xx:xx:xx:xx” message on the console and the CLI might respond slowly.
- The four 25G ports of models M4350-44M4X4V, M4350-24X4V, and M4350-24X4V can operate at either 25G or 10G speed but not simultaneously at 25G and 10G speed.
- A stacking link works only at the highest speed that the port supports. For example, if you configure a 25G port in stack mode, the port can operate only at 25G and not at 10G. Therefore, a stacking link cannot be established if a 25G port and a 10G port are interconnected.
Download Link: https://www.downloads.netgear.com/files/GDC/M4350/GSM43xx_MSM4352_XSM4316_XSM4324_XSM4328xx_V14.0.2.23.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000066225