Enhancements:
- Support MSchapv2 for RADIUS authentication
Bug Fixes:
- Fixes the issue where you might not be able to access the device UI after the switch’s IP address is changed or renewed multiple times.
- Fixes the issue where the device UI might become inaccessible when the IP address is changed.
- Fixes the issue where you cannot configure IPv6 addresses in the range of unique local addresses (fc00::/7).
- Fixes the issue that the EAP Success packets still flood after receiving EAPOL start packets.
- Fixes the issue when disabling Port Power on a port causes abnormal Overload Fault on other PoE ports.
Security Fixes:
- This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security.
Warnings:
Read and follow these warnings before you update firmware version 6.0.8.x or an earlier version to version 6.0.9.1 or a later version:
- After you update the switch firmware to version 6.0.9.1 or a later version, we recommend that you do you do not downgrade to version 6.0.8.x or an earlier version.
- Because HTTPS is disabled by default, the login page of the device UI does not display automatically after you use HTTPS to update to version 6.0.9.1 or a later version. Open a new web browser tab and type the switch’s IP address to access the login page.
- The SNMPv1 and SNMPv2 default community strings Private and Public are not available in version 6.0.9.1 or a later version. We recommend that you set a different community string before updating the firmware.
- The authentication protocol for SNMPv3 automatically changes to MD5 if the current setting is None.
- The default setting for the Smart Control Center (SCC) management option changes from enabled to disabled. Note: The SCC Utility can still discover the switch.
Download Link:
https://www.downloads.netgear.com/files/GDC/GS728TPv2/GS728TPv2_GS728TPPv2_GS752TPv2_GS752TPPv1_V6.0.10.22.zip
Firmware Update Instructions:
The released zip file contains the switch firmware and MIB files. Unzip the file to extract the switch image for firmware updating.
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000066214