Enterprise AV Home WiFi Mobile Wifi Support Shop Deals

To configure IPsec IKEv2 you must first have the certificate. This must be exported from the router and can be done either through Insight or the local GUI of the router.

To export the Certificate in Insight.

  1. Access the Insight Cloud Portal.
  2. Navigate to the Devices tab and the Device settings of the router.
  3. The router’s settings page will display.
  4. Click General > Certificate Authority.
  5. Highlight the certificate you wish to export and click Export Certificate. The certificate will be zipped and will need to be extracted.
  6. The certificate is now exported and can now be imported into Windows.

To export the Certificate on the local GUI.

  1. On a computer or mobile device that is connected to your PR60X router's network, access https://www.routerlogin.net.                                                                                                                                                            Your browser might display a security message, which you can ignore.
    1. A login window opens.
  2. Enter the router user name and password.
    1. The user name is admin. If you did not change your router's password during setup, enter password. The user name and password are case-sensitive.
  3. On the router dashboard, select VPN > Certificate.
  4. Under the Certificate page, select Authorities.
  5. Highlight the certificate you wish to export and click Export Certificate.
  6. The certificate is now exported and can now be imported into Windows.

To setup through Windows.

  1. Double click the Certificate Authority file.
  2. Under the Certificate Properties page, click Install Certificate.
  3. Select Local Machine and click Next.
  4. Click Yes if prompted with UAC.
  5. Select Place all Certificates in the following store and click Browse.
  6. Click Trusted Root Certification Authorities, click OK, and click Next.
  7. Click Finish to save importing the certificate.
  8. Next Click on the Windows Start and navigate to Network & Internet Settings on the PC.
  9. Click VPN and click the + button to add a VPN connection.
  10. Under VPN Provider, leave the field Windows (built-in).
  11. Add a descriptive name in the Connection Name field.
  12. Add the WAN IP or Hostname of the router this can be found on the dashboard screen of the router.
  13. Leave VPN type as IKEv2.
  14. Under type of sign-in info, select User name and password.
  15. Input the user name and password and click Save.
  16. The connection is now created and ready to use.
Last Updated:07/07/2025 | Article ID: 000066056

This article applies to:

Recently Viewed Articles

    Our team is here to help!

    Phone
    Chat
    Email