Features:
- Supports 100G models
- Supports Precision Time Protocol version 2 (PTPv2) Boundary Clock (BC)/Grand Master (GM) in the AV UI on M4350 series 100G models
- Supports Audio Video Bridging (AVB) over a LAG
- Supports 2-step PTP mode
Bug Fixes:
- Fixes the issue where the bit rate displays incorrectly under the Port Statistics in the AV UI.
- Fixes the issue where a problem occurs with the restoration of a backup configuration in the AV UI.
- Fixes the issues where PTP synchronization fails when the switch is connected to an Emergent camera or a Riedel device.
- Fixes the issue where stacked 100G links do not function.
- Fixes the issue where a port is oversubscribed (causing service quality problems) when multicast traffic traverses the CPU port, preventing the switch from processing IGMP leave messages.
- Fixes the issue where a connection problem occurs on a 25G, 40G, or 100G interface.
- Fixes the issue where a memory leak occurs when the switch is idle.
Known Issues:
- The four 25G ports of models M4350-44M4X4V, M4350-24X4V, and M4350-24X4V can operate at either 25G or 10G speed but not simultaneously at 25G and 10G speed.
- A stacking link works only at the highest speed that the port supports. For example, if you configure a 25G port in stack mode, the port can operate only at 25G and not at 10G. Therefore, a stacking link cannot be established if a 25G port and a 10G port are interconnected.
Download Link: https://www.downloads.netgear.com/files/GDC/M4350/GSM43xx_MSM4352_XSM4316_XSM4324_XSM4328xx_V14.0.2.17.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000065994