Enhancements:
- The AP transmit power (in dBm) is now displayed in the local browser interface and in NETGEAR Insight.
- Probe requests from clients that do not associate are now logged in syslog.
- Load balancing alarms now include the reason why a client is denied a connection to the AP.
- The AP now prevents client connectivity issues while the AP scans for neighboring APs.
- All types of traffic are now blocked for a client that is connected to a captive portal SSID before web authentication is complete. (In earlier releases, only HTTP traffic was blocked.)
Bug Fixes:
- Fixes the issue where clients that are connected to a captive portal SSID can access the Internet without web authentication.
- Fixes the issue where clients that are connected to a captive portal SSID are unable to open the authentication page after roaming.
- Fixes the issue where the Captive Portal feature does not work if client isolation is enabled on an SSID.
- Fixes the issue where packet loss occurs for clients that are connected to a guest SSID while roaming between different APs.
- Fixes the issue where client isolation does not work for an SSID that is configured with a non-default VLAN.
- Fixes the issue where duplicate logs are generated in syslog files.
- Fixes various stability issues that are related to the Captive Portal feature.
Known Issues:
- When a dynamic VLAN (DVLAN) is enabled, changing the management VLAN fails, and an invalid error message is generated.
Workaround: Temporarily disable the DVLAN, change the management VLAN, and then reenable the DVLAN. - Changes to a NAT SSID configuration might take up to 3 minutes to be applied.
Workaround: Wait at least 3 minutes before connecting any clients. - Facebook Wi-Fi authentication does not work because Facebook has discontinued the support for this feature.
Workaround: Use the Instant Captive Portal or External Captive Portal feature or the basic Captive Portal feature. - The captive portal splash page might display the error message "ERR_TOO_MANY_REDIRECTS" while connecting to a captive portal that is enabled on an SSID.
Workaround: Clear the browser cache. - 802.11r roaming does not work between an AP that runs firmware version 10.5.0.x and another AP that runs an older firmware version at the same Insight network location.
Workaround: Upgrade all APs at an Insight network location to the latest firmware version. - The AP stops responding after you first change or enable an Instant Captive Portal and then change or enable a dynamic VLAN (DVLAN) configuration, or the other way around.
Workaround: After enabling the Instant Captive Portal, wait a few minutes before you enable the DVLAN configuration. Or, after enabling the DVLAN configuration, wait a few minutes before you enable the Instant Captive Portal. - Clients connected to a captive portal that is configured on an SSID might not see the splash page for authentication when the VLAN of the SSID is the same as the management VLAN, a VLAN that is configured as a DVLAN, or a VLAN that has a multi-Pre-Shared Key (multi-PSK) configured.
Workaround: For the SSID on which the captive portal is configured, use the default VLAN or a unique VLAN that is not used as the management VLAN, that is not a DVLAN, or that does not use MPSK. - A RADIUS based MAC ACL does not work with multi-PSK and DVLAN.
- mDNS: A device running Windows might not discover certain printers.
Workaround: Manually add the IP address of the printer on the Windows device. - Your web browser might not redirect automatically to the login page after a firmware upgrade.
Workaround: Refresh the page in your web browser. - Radio information on the AP Dashboard page might not be displayed properly.
Workaround: Refresh the page in your web browser. - Captive portal authentication does not work if you simultaneously change the captive portal and the VLAN configuration for an SSID.
Workaround: Change either the captive portal configuration or the VLAN configuration for an SSID and save the changes. Then go back to the SSID and make the other configuration changes. - When client isolation is enabled for an SSID, clients that are connected to the SSID cannot reach each other even if their IP addresses are added to the allowed list.
- Video streaming to multiple clients does not work properly if there are more than eight clients in a single multicast group.
- If clients experience connectivity issues on the higher band channels of the 5 GHz radio and subsequently switch to the 2.4 GHz radio, they might experience lower throughput.
Workaround: Configure lower band channels on the 5 GHz radio. - Some newer IoT devices might experience issues connecting to the AP.
Workaround: Upgrade the IoT devices to the latest driver version and try again. If security is set to WPA3 or WPA2/WPA3 mixed mode, change it to WPA2 mode, and try again.
Download Link: https://www.downloads.netgear.com/files/GDC/WAX625/WAX625_firmware_V10.7.0.11.zip
Firmware Update Instructions:
To update the firmware of your product, follow the instructions mentioned in the product manual. To refer the user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000065915