Enhancements:
- Adds the “10G Auto” option under Port Configuration on the Switching page so that you can set the speed to 10G Auto.
- Renames the “MAC Based” option to “MAC Auth Bypass” option under Port Control on the Security > Port Authentication > Advanced > Port Authentication page.
Bug Fixes:
- Fixes the issue where SNMPv1/v2 traps are not transmitted when a device’s port is connected or disconnected.
Known Issues:
- The Registration page displays again after you restart the switch, even if you turned off the registration option.
Workaround: Close the registration pop-up window, or register the switch. - If a partner device functions at 1000 Mbps and you disable the connected port on the XS728T or XS748T switch, the port speed on the partner device displays as only 10 Mbps.
Workaround: Unplug the cable. - If you configure the management VLAN with an ID other than 1, the switch default static IP address (192.168.0.239) becomes 0.0.0.0.
Workaround: Use DHCP or assign a valid static IP address. - A cable test is accurate for copper ports that are linked at 10G speed with Cat5e cables. With other link speeds or cable types, the results might not be accurate.
- If you update the firmware using a USB device, the USB device must support the FAT32 file type. The switch does not support the NTFS file type.
Download link: https://www.downloads.netgear.com/files/GDC/XS728T/XS728T_XS748T_V6.5.1.71.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000065904