New Features:
- Overall
- Supports the M4500 switch models
- Supports a dark theme
- Adds a Network Monitoring section that includes Switches Health, Network Statistics, Fiber Modules, and Network Logs
- Displays device renderings
- Allows you to upload and display site and device pictures
- Device management
- Supports reordering of the device table
- Supports site-wide switch configuration backup and restoration
- Enhances switch firmware upgrades
- Supports firmware upgrade of groups of switches
- Supports scheduling of switch firmware upgrades
- Site Topology
- Supports the use of device renderings to represent devices
- Adds a ‘Default Topology’ with a ‘Location’ view
- Enhances the ‘Default Topology > Abstract view’ page
- Adds a ‘Physical Topology’ with detailed device view
- Adds an ‘IGMP Snooping Querier’ view
- Site Settings
- Supports a global ‘PTPv2 TC’ configuration
- Adds an ‘Inter-VLAN Routing’ configuration
- Support the following new Network Profiles: Crestron DigitalMedia AV Network,
Visionary Network AV, and NUCLEUS Converged AV Network.
Bug Fixes:
- Fixes the issue where the ‘VLAN Routing and DHCP Server > Basic Configuration’ pagination is not correct.
- Fixes the issue where a configured static MAC address reservation doesn’t display on the ‘Site Settings > Routing > Static Reservations’ page.
- Fixes the issue where you can’t configure VLAN routing functionalities with the ‘Shure Split audio and control’ profile.
- Fixes the issue where the DHCP binding information isn’t available for some VLANs.
- Fixes the issue where not all devices are successfully onboarded when you use the Engage initial configuration wizard.
- Fixes the issue where the ‘Site Settings’ pagination isn’t correct.
Known Issues:
- You can’t display the M4500 switch MLAG peer links in ‘Site Topology’ views.
- A group firmware update on certain M4300 switch models might fail.
Workaround: Use the AV UI to update the M4300 switch firmware. - You can’t display stacked units correctly in ‘Site Topology’ views.
- You can’t display the EEPROM information for certain fiber modules.
Workaround: Use the switch CLI to display the EEPROM information. - The ‘Physical Topology’ page doesn’t display 25G links with a distinct color.
- Connection requests might be refused during the onboarding process of an M4500 switch.
Workaround: Try again until the connection request is successful. - The device view for switch model M4300-48X device is distorted on the ‘Managed Devices > Configure’ page.
- The ‘Site Neighbors’ table doesn’t auto-refresh.
Workaround: Click the Refresh button to update the table. - The Engage UI and the AV UI allow an AVB profile configuration on stacked M4350 switches.
Workaround: Don’t configure an AVB profile on stacked M4350 switches because this configuration isn’t supported. - The management VLAN ID is inconsistent for onboarded devices if a pre-existing management VID doesn’t match with the current site settings.
Workaround: Be sure that the management VLAN ID is the same across the entire site before you upgrade the firmware.
Download Link :
Engage Controller for MacOS: https://www.downloads.netgear.com/files/GDC/NETGEAR_Engage/Engage-MacOS-V1.3.8.6.zip
Engage Controller for Windows: https://www.downloads.netgear.com/files/GDC/NETGEAR_Engage/Engage-Windows-V1.3.8.6.zip
Minimum AV UI Version Requirement:
This release requires you to upgrade the M4250, M4300, M4350, and M4500 switches to AV UI version 2.2.5.37 or a later version so that the features that are supported in Engage version 1.3.8.6. function properly.
Firmware Update Instructions
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.