Enhancements:
- Upgrades Insight Agent to version 6.9.0.60900034
Security Fixes:
- This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security.
Warnings:
Read and follow these warnings before you update a firmware version that’s earlier than version 7.0.8.4 to version 7.0.8.4 or a later version:
- After you update the version to 7.0.8.4 or a later version, we recommend that you do not downgrade to version to 7.0.7.X or an earlier version.
- Because HTTPS is disabled by default since version 7.0.6.2, the device UI login page does not display automatically after you use HTTPS to update to version 7.0.8.4 or a later version. Open a new web browser tab and type the switch’s IP address to access the login page.
- After you manually enable HTTPS, if you access the device UI via HTTP, you are automatically redirected to HTTPS.
- The SNMPv1 and SNMPv2 default community strings Private and Public are not available in version 7.0.8.4 or a later version. We recommend that you set a different community string before updating the firmware.
- The authentication protocol for SNMPv3 automatically changes to MD5 if the current setting is None. After the firmware upgrade, reconfigure the authentication protocol for SNMPv3.
- The default setting for the Smart Control Center (SCC) management option changes from enabled to disabled. Note: The SCC Utility can still discover the switch.
Download Link: https://www.downloads.netgear.com/files/GDC/GS108Tv3/GS108Tv3_GS110TPv3_GS110TPPv1_V7.0.9.12.zip
Firmware Update Instructions:
The released zip file contains the switch firmware and MIB files. Unzip the file to extract the switch image for firmware updating.
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.