New Features:
This version supports the following new switches:
- GS724TPv3 and GS724TPPv3
- GS728TPv3, GS728TPPv3, GS752TPv3, and GS752TPPv3
Bug Fixes:
- Fixes the issue where you cannot download a configuration file from the switch via the NMS300.
- Fixes the issue where you cannot update firmware from the NMS300.
Security Fixes:
- This software addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security.
Known Issue:
- Any type of Canon printer application can interfere with the installation or firmware update process on the NMS300.
Workaround: Uninstall the Cannon printer application from your computer, install or update the NMS300, and then reinstall the Canon printer application after the NMS300 installation is complete. - The firmware update process window may not close.
Workaround: Reboot your computer. - The Device dashboard does not display all Smart Switch temperature, CPU, and memory information.
- The double quotes (") special character is not supported in HTML syntax, so it is not supported in usernames or passwords.
Download Link:
Win32 bit: https://www.downloads.netgear.com/files/GDC/NMS300/NMS300_V1.7.0.20(Win32).zip
Win64 bit: https://www.downloads.netgear.com/files/GDC/NMS300/NMS300_V1.7.0.20(Win64).zip
Firmware Update Instructions:
- There are two installers: one for 32-bit Windows OS, and another for 64-bit Windows OS. Download the appropriate zip file from the NETGEAR web site for either the 32-bit or 64-bit version of Windows.
- To run the NMS300, configure your computer with a static IP address.
The NMS300 is a server application that binds itself to the static IP address of the machine. - Unzip the file to obtain the executable installer file.
- Double click on the executable to launch the installer and customize the settings.
- If another application is already using TCP port number 8080 on the Windows machine, set this to use a different port number.
- If you have multiple Network Interface Cards (NICs) on your computer, choose the appropriate NIC in the NIC selection page in the setup wizard.
- Clear your web browser’s cache before you use the NMS300 web UI.
- To launch the NMS300 web UI from the same computer on which you installed NMS300, enter the URL http://localhost:8080, or the IP address of the PC server where NMS300 is installed.
- If a different port number is set for the web server during NMS300 installation, make sure to replace 8080 in this URL with the port number provided during installation.
- To access the NMS300 web UI from a remote computer, replace “localhost” with the IP address of the NMS300 machine.
- The NMS300 login page displays.
The default username is admin and the default password is admin.
Last Updated:10/17/2025
|
Article ID: 000065646