Bug Fixes:
- Fixes the issue where the switch lets you set a new password that starts with special characters such as ‘$’ and ‘!’ but then does not let you log in with the new password afterwards.
- Fixes the issue where the value of the STP path cost for a LAG interface is overwritten with the default value when the link status of the LAG goes down. (You can set the STP path cost through the web-based management interface path Switching > STP > Advanced > CST Port Configuration.)
Known Issues:
- The Registration page displays again after you restart the switch, even if you turned off the registration option.
Workaround: Close the registration pop-up window, or register the switch. - If a partner device functions at 1000 Mbps and you disable the connected port on the XS728T or XS748T switch, the port speed on the partner device displays as only 10 Mbps.
Workaround: Unplug the cable. - If you configure the management VLAN with an ID other than 1, the switch default static IP address (192.168.0.239) becomes 0.0.0.0.
Workaround: Use DHCP or assign a valid static IP address. - A cable test is accurate for copper ports that are linked at 10G speed with Cat5e cables. With other link speeds or cable types, the results might not be accurate.
- If you update the firmware using a USB device, the USB device must support the FAT32 file type. The switch does not support the NTFS file type.
Download link: https://www.downloads.netgear.com/files/GDC/XS728T/XS728T_XS748T_V6.5.1.66.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000065557