Bug Fixes:
- Fixes the issue where clients cannot connect after a firmware upgrade to version 10.3.1.5.
- Fixes the issue where an SSID passphrase is restricted to contain only a limited set of special characters after a firmware upgrade to version 10.3.1.7. Now, any of the special characters can be used in the passphrase:
~ ` ! @ # $ % ^ & * ( ) - = _ + [ ] { } \ | ; ' : " , . / < > ?.
Security Fixes:
- Fixes security vulnerabilities.
For more information about security vulnerabilities, visit https://www.netgear.com/about/security.
Known Issues:
- A RADIUS MAC ACL does not work with multi-PSK and a dynamic VLAN (DVLAN).
- mDNS: A device running Windows cannot discover certain printers.
Workaround: Manually add the IP address of the printer on the Windows device. - mDNS: Even though Apple AirPlay services are discoverable, they might not be accessible.
- Your web browser might not redirect automatically to the login page after a firmware upgrade.
Workaround: Refresh the page in your web browser. - Radio information on the AP dashboard might not load.
Workaround: Refresh the page in your web browser. - Captive portal authentication does not work if the captive portal and VLAN configurations for an SSID are changed simultaneously.
Workaround: Change the captive portal configuration and VLAN configuration one at a time for an SSID. - When client isolation is enabled on an SSID, clients connected to the same SSID cannot reach each other even if their IP addresses are added to the allowed list.
- Intel AX210 client connectivity might encounter disruptions when roaming.
- Clients with the latest iOS version might not be able to roam successfully when both WPA3 security and 802.11r roaming are enabled on the same SSID.
Workaround: Do not enable WPA3 and 802.11r roaming together. - Video streaming to multiple clients does not work properly if there are more than eight clients in a single multicast group.
- If clients experience connectivity issues on the higher band channels of the 5 GHz radio and subsequently switch to the 2.4 GHz radio, they might experience lower throughput.
Workaround: Configure lower band channels on the 5 GHz radio. - Some newer IoT devices might experience issues connecting to the AP.
Workaround: Upgrade the IoT devices to the latest driver version and try again. If security is set to WPA3 or WPA2/WPA3 mixed mode, change it to WPA2 security, and try again.
Download Link : https://www.downloads.netgear.com/files/GDC/WAX615/WAX615-V10.3.1.8_firmware.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000065457