Bug Fixes:
- Fixes the issue where only 1 or 2 entries remain on the SNMPv1/v2 community table on the System>SNMP>SNMPv1/v2>Community Configuration page after a system reboot.
- Fixes the issue that the SNMP trap server address set through the device UI is not saved in the configuration file after a system reboot.
Known Issues:
- The Registration page displays again after a reboot even if it was turned off before.
Workaround: Close the registration window or register the device. - If the connecting partner device is 1000Mbps, the port speed on the partner device displays as 10 Mbps after disabling the port on the XS728T/XS748T.
Workaround: Unplug the cable. - When configuring the management VLAN other than VLAN 1, the default static IP (192.168.0.239) becomes 0.0.0.0.
Workaround: Use DHCP or assign a valid static IP address. - The cable test is effective for copper ports linked at 10G speed with Cat5e cables. With other link speeds or cable types, the results might not be as accurate.
- If updating firmware using a USB device, the USB device must support the FAT32 file type. The NTFS file type is NOT supported.
Download link: https://www.downloads.netgear.com/files/GDC/XS728T/XS728T_XS748T_V6.5.1.65.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000065213