New Features and Enhancements:
- Support for new countries:
- South Korea
- Canada
- AP behavior on 802.3at power:
- Operates with full transmit power on 5GHz radio
- Operates with half transmit power on 2.4GHz radio
- Support for up to 512 MAC ACL entries per group
- System stability improvements
Security Fixes:
- Fixes security vulnerabilities.
For more information about security vulnerabilities, visit https://www.netgear.com/about/security/
Bug Fixes:
- Fixes and issue where clients are still able to connect to 5 GHz SSID even when radio is disabled
- Fixes an issue with preferred backhaul not working
- Fixes an issue where clients can’t reach the Internet if MAC ACL was enabled and then disabled on an SSID
- Fixes an issue with Allow Access to UI not working
- Fixes an issue where a client connected to an SSID in NAT Mode can’t access the AP’s device UI
- Fixes an issue where the 160 MHz channel list fails to display after a DFS radar detection event
- Fixes an issue with reloading the dashboard when the management mode is changed from standalone mode to Insight mode
Known Issues:
- Clients fail to reach to the Internet when connected to a NAT mode SSID with non-default management VLAN and URL filtering enabled.
- Channel width of an SSID configured with the 160MHz channel width changes to 80MHz if a radar event is detected. All channels may not be shown on the UI.
Workaround: Manually set the channel width to 160MHz. - Some clients may experience connectivity issues on 5GHz higher band channels and may switch to 2.4GHz band.
Workaround: Configure 5GHz lower band channels. - Some iOS devices with specific iOS versions might fail to connect to a WPA3 enterprise SSID.
Workaround: Upgrade the device to the latest iOS version. - Some clients might not display an auto pop-up while connecting to a guest SSID, or there might be a delay before the splash page displays.
Workaround: Use a web browser to access the Internet. - Some clients might not display a pop-up window when connecting to a guest SSID, or there might be a delay before the splash page displays.
Workaround: Use a web browser to access the Internet. - aplogin.com and aplogin.net might not redirect to the login page on some Android clients with specific Chrome browser versions.
Workaround: Enter the access point's IP address to access the login page. - Some old generation iOS devices with iOS version 14.4.2 might fail to connect to a WPA3 personal SSID.
Workaround: Change the SSID security to WPA3/WPA2 Personal.
Download Link: https://www.downloads.netgear.com/files/GDC/WAX630E/WAX630E_V10.1.9.2.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000064982