Bug Fixes:
- There is a chance that a port may not link up with a device using an Intel I1219-LM NIC. The only way to recover is to reboot the switch.
- The pop-up window for changing the default password disappears after a few seconds of inactivity.
- Can’t change the LAG type on Switching > LAG > Basic > LAG Configuration when the link status of its member ports is Down.
- Unable to import private key successfully for SSL certificate under the Security > Access > HTTPS > Certificate Management page.
Known Issues:
- The Registration page displays again after a reboot even if it was turned off before.
Workaround: Close the registration window or register the device. - The GUI freezes when the HTTPS session times out while using IE11.0.
Workaround: Use another browser or refresh the whole page after a timeout. - If the connecting partner device is 1000Mbps, the port speed on the partner device displays as 10 Mbps after disabling the port on the XS728T/XS748T.
Workaround: Unplug the cable. - When configuring the management VLAN other than VLAN 1, the default static IP (192.168.0.239) becomes 0.0.0.0.
Workaround: Use DHCP or assign a valid static IP address. - The cable test is effective for copper ports linked at 10G speed with Cat5e cables. With other link speeds or cable types, the results might not be as accurate.
- If updating firmware using a USB device, the USB device must support the FAT32 file type. The NTFS file type is NOT supported.
Download link: https://www.downloads.netgear.com/files/GDC/XS728T/XS728T_XS748T_V6.5.1.59.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:10/17/2025
|
Article ID: 000064869