Bug Fixes:
- Fixes the issue where the system crashes after changing the IP address mode from DHCP to static on the default VLAN.
- Fixes the issue where running switch configurations display duplicate entries of the last issued storm-control command.
- Fixes the issue where some statically configured routes are not retained after the switch is rebooted.
- Fixes the issue where the value of the configured LLDP Transmit Interval gets lost after the switch is rebooted.
- Fixes the issue where the HTTP service crashes after receiving excessively long crafted HTTP requests.
Download Link: https://www.downloads.netgear.com/files/GDC/M4500/XSM4556_V7.0.1.16.zip
Firmware Update Instructions:
Starting from the 7.0.1.10 release, only signed firmware images are supported. Updating the firmware directly from the unsigned version (7.0.0.20 or prior versions) to signed version 7.0.1.x is not supported. Instead, you must update to a transition ONIE image first, and then to the signed ONIE image version 7.0.1.x as shown below:
- Update from unsigned firmware version 7.0.0.x to transition firmware version 7.0.1.6
- Update from transition firmware version 7.0.1.6 to signed firmware version 7.0.1.x
As of this release, the transition firmware image version is 7.0.1.6. The transition firmware image provides options to update to signed or unsigned firmware images as shown below. Transition firmware shouldn’t be used for production. In the transition firmware “with verification” refers to signed firmware image and “without verification” refers to the unsigned firmware image
_ _ _____ _____ ____ _____ _ ____
| \ | | | ____| |_ _| / ___| | ____| / \ | _ \
| \| | | _| | | | | _ | _| / _ \ | |_) |
| |\ | | |___ | | | |_| | | |___ / ___ \ | _ <
|_| \_| |_____| |_| \____| |_____| /_/ \_\ |_| \_
=======================
NETGEAR M4500 Menu
=======================
1: CLI Console
2: Firmware update without verification using SCP
3: Firmware update without verification using TFTP
4: Firmware update with verification using SCP
5: Firmware update with verification using TFTP
6: Reboot
=======================
Enter your menu option:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.