New Features:
This software version supports the following new switch models:
- MX510TXM and MX510TXUP
Security Fixes:
- Fixes security vulnerabilities.
For more information about security vulnerabilities, visit https://www.netgear.com/about/security.
Bug Fixes:
- Added a warning message that upgrading the firmware will cause the device to reboot automatically.
- Fixed the issue where no email notification is sent when an email address is added in the SMTP Email option.
- Fixed ICMP ping monitoring.
Known Issue:
- Some Smart switches temperature, CPU, and memory information doesn't display on the Device dashboard.
Download Link:
Win32 bit: https://www.downloads.netgear.com/files/GDC/NMS300/NMS300_V1.7.0.8(Win32).zip
Win64 bit: https://www.downloads.netgear.com/files/GDC/NMS300/NMS300_V1.7.0.8(Win64).zip
Firmware Update Instructions:
- There are 2 installers: one for 32-bit Windows OS, and another for 64-bit Windows OS. Download the appropriate zip file from the NETGEAR web site for either the 32-bit or 64-bit version of Windows.
- To run NMS300, the machine must be configured with a static IP address.
The NMS300 is a server application that binds itself to the static IP address of the machine. - Unzip the file to obtain the executable installer file.
- Double click on the executable to launch the installer and customize the settings.
- If another application is already using TCP port number 8080 on the Windows machine, set this to use a different port number.
- If you have multiple NICs (Network Interface Cards) on your machine, make sure to choose the appropriate NIC in the NIC selection page in the setup wizard.Once the installer finishes the installation, NMS300 should be up and running as a service.
- Make sure to clear your web browser’s cache prior to using the NMS300 web UI.You do not need to reboot the Windows server to start using NMS300.There is no need to enter a license key in order to get the NMS300 to start managing devices.
- To launch the NMS300 web UI from the same machine where you installed NMS300, enter the URL http://localhost:8080, or the IP address of the PC server where NMS300 is installed.
- If a different port number is set for the web server during NMS300 installation, then make sure to replace 8080 in this URL with the port number provided during installation.
- To access the NMS300 web UI from a remote machine, replace “localhost” with the IP address of the NMS300 machine.
- The NMS300 login page displays.
The default user name is admin and the default password is admin.
Last Updated:10/17/2025
|
Article ID: 000063971