Bug Fixes:
- Fixes an issue where SNMP service hangs when the MAC table is fully populated and SNMP walk is executed continuously.
- Fixes an issue that turning off both HTTP and HTTPS at the same time causes the device UI to become inaccessible.
- Fixes an issue that causes a brief pause in protocol packet forwarding to the CPU when the rate exceeds 150 packets per second.
Warnings:
Read and follow these warnings before updating any firmware version prior to 2.0.0.XX:
Updating GS724TPv2 FW from v1.1.1.x to v2.0.6.1
If you are updating GS724TPv2 FW from v1.1.1.x to v2.0.6.1, make sure to follow these instructions carefully.
Caution: To successfully update the firmware to v2.0.6.1 from v1.1.x.x, you must perform a series of updates in the following order:
V1.1.1.x.rom > V1.1.50.39.rom > V2.0.0.16.img > V2.0.0.16.bix > V2.0.6.1
Existing configurations will be erased after updating the firmware from v1.1.1.x to v2.0.0.x. Furthermore, configuration files are not compatible between v1.x.x.x and v2.x.x.x firmware.
Note: HTTPS is disabled by default since firmware release v2.0.4.3, so the device UI Home page does not display automatically after using HTTPS to upgrade to this firmware version. Workaround: Open a new web browser tab and type the switch’s IP address to access the Home page.
Download Link: https://www.downloads.netgear.com/files/GDC/GS724TPv2/GS724TPv2_GS724TPP_V2.0.6.1.zip
Firmware Update Instructions:
The released zip file contains the switch firmware and MIB files. Unzip the file to extract the switch image for firmware updating.
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.