Bug Fixes:
- Fixes the issue where the SNMP service hangs when the MAC table is fully populated and SNMP walk is executed continuously.
- Fixes the issue where turning off both HTTP and HTTPS at the same time causes the device UI to become inaccessible.
- Fixes the issue where a brief pause in protocol packet forwarding to the CPU occurs when the rate exceeds 150 packets per second.
Warnings:
Read and follow these warnings before updating a firmware version that’s prior to 7.0.1.XX:
- Because HTTPS has been disabled by default since v7.0.6.2, the device UI Home page does not display automatically after using HTTPS to update to this firmware version. Open a new web browser tab and type the switch’s IP address to access the Home page.
- Default community string “Private” and “Public” for SNMPv1/v2 are not available in newer firmware. Set a different community string before updating the firmware.
- Authentication protocol for SNMPv3 automatically changes to “MD5” if the current setting is “None”.
- The default setting for the Smart Control Center (SCC) Management option changes from enabled to disabled. Note: The SCC Utility can still discover the switch.
Download Link: https://www.downloads.netgear.com/files/GDC/GS108Tv3/GS108Tv3_GS110TPv3_GS110TPP_V7.0.7.1.zip
Firmware Update Instructions:
The released zip file contains the switch firmware and MIB files. Unzip the file to extract the switch image for firmware updating.
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:10/17/2025
|
Article ID: 000063730