Enhancements:
- Show system configured name in the GUI
Bug Fixes:
- PTPv2 L2 multicast packets with destination address 01:1b:19:00:00:00 are not passing through the switch.
- SNMP walk returns the total available power incorrectly as zero.
- Support warm reset and factory default reset functionality for GSM43xx models using the reset button similar to other M4300 switches.
- VRRP/CARP is not working for IPv6.
- FAN interrupt messages are logged even when the FAN is working perfectly which is not necessary.
- XSM4396 & XSM4316PS switch interface operating at 2.5G speed is not forwarding the traffic.
- Adjust pre-emphasis settings to make certain third-party 10G/40G SFPs work properly in the switch.
- The stack is unstable after a rebooted stack member comes back online.
Known Issues:
- A new GUI page is added in 12.0.11.x release under Routing > Multicast > Mroute Static-Multicast Configuration. This page doesn’t show up when the switch firmware is upgraded from 12.0.9.x to 12.0.11.x. Clear the browser cache to view this newly added page.
Download Link: https://www.downloads.netgear.com/files/GDC/M4300/GSM_XSM4300_V12.0.13.7.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:10/17/2025
|
Article ID: 000063719