Bug Fixes:
- Fixes the RADIUS reauthentication configuration where it did not clear after session timeout.
- Fixes an issue where the packet counter for the CPU port on the Statistics page did not work.
- Fixes an issue where a client device can fail to get a DHCP IP address when there is another network device connected between the switch and the client device.
Security Fixes:
- Fixes various security vulnerability fixes and enhancements.
Warnings:
- HTTPS is disabled by default since firmware release v1.0.4.2, so the device UI Home page does not display automatically after using HTTPS to upgrade to this firmware version. Open a new web browser tab and type the switch’s IP address to access the Home page.
Updating GS724TPv2 FW from v1.1.1.x to v2.0.4.3
If you are updating GS724TPv2 FW from v1.1.1.x to v2.0.4.3, make sure to follow these instructions carefully.
Caution: To successfully update the firmware to v2.0.0.16 from v1.1.x.x, you must perform a series of updates in the following order:
V1.1.1.x.rom > V1.1.50.39.rom > V2.0.0.16.img> V2.0.0.16.bix.
- Existing configurations will be erased after updating the firmware from v1.1.1.x to v2.0.0.x. Furthermore, configuration files are not compatible between v1.x.x.x and v2.x.x.x firmware.
Download Link : https://www.downloads.netgear.com/files/GDC/GS724TPv2/GS724TPv2_GS724TPP_V2.0.4.3.zip
Firmware Update Instructions:
The released zip file contains the switch firmware and MIB files. Unzip the file to extract the switch image for firmware updating.
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.