When configuring your AirBridge as an access point or master,
you can configure the 5G SSID settings. When congifuring the 5G SSID settings in the local
browser user interface, you can enable the VLAN Isolation radio button to prevent clients on
different VLANs from communicating with each other. After enabling VLAN Isolation, you must
enter the VLAN ID in the ID field. This VLAN ID must already be defined in your network. The
default VLAN ID is 1. The range is from 1 to 4094. If you enable VLAN isolation, clients can
still communicate with each other over the Internet. By default, the Disable radio button is
selected.
For more information, see How do I configure my AirBridge as an access point?.
Last Updated:07/07/2025
|
Article ID: 000061693