New Features and Enhancements:
- Guest Network support.
- Ethernet BH support for MR60 x 1 + MS60 x 1.
- Improved the attached device GUI design.
- Fixed incorrect satellite LED display issue.
- Fixed satellite displayed 0.0.0.0 IP address in the web GUI.
- Fixed incorrect default PPPoE mode setting.
- Fixed the satellite number displayed 0 on NH APP dashboard after FW upgrade.
- Fixed the Enable AX option can’t be disabled issue.
- Fixed the new added client takes longer time to be displayed on the attached device page issue.
Known Issues & Bugs:
- Some new devices are displayed as unknown no matter in web GUI or NH APP.
Download Link:
MR60 (Mesh Router): http://www.downloads.netgear.com/files/GDC/MK62/MR60-V1.0.1.62_2.0.18.zip
MS60 (Mesh Satellite): http://www.downloads.netgear.com/files/GDC/MK62/MS60-V1.0.1.62_2.0.18.zip
Installation Instructions:
- Download the firmware to a convenient place such as your desktop.
- Log in the router using http://routerlogin.net.
- Click ADVANCED tab.
- Click Administration.
- Click Router Update.
- Click Manual Update tab.
- Find “Locat and select the upgrade file on your disk” and click “Browse” and locate the file you just downloaded.
- Click Upload. While the firmware is loading, do not interrupt the upgrade process.
- The router reboots when the upgrade is complete.
- In step 7, you can also select satellite and follow the similar steps to upgrade satellite firmware.
- After the router boots up and the LED becomes steady blue.
To check that the upgrade was successful, log in to the router again at http://routerlogin.net and check the firmware version.
Last Updated:07/07/2025
|
Article ID: 000061561