New Features and Enhancements:
- To comply with California state law, the local browser UI now requires that you change the default admin password after using it to access the switch.
- Added a new option under Security > Management Security > SCC Control to disable or enable the Smart Control Center (SCC). It is set to Disable by default. (Note: If you cannot see this new option, refresh your browser or clear its temporary internet files/cache. The SCC Utility can still discover the switch even if the SCC option is disabled.)
Known Issues:
- The local browser UI displays the incorrect number of configured IPv6 routes.
- Multicast forwarding entries are not cleared immediately after the port is shut down.
- Link flaps every 60 seconds with port 10 if using an AGM734 SFP Transceiver to connect a peer that is powered off.
- When configuring management VLAN other than VLAN 1, default static IP (192.168.0.239) becomes 0.0.0.0
Workaround: Use DHCP or assign a valid static IP address.
Limitations:
- If updating firmware through a USB device, the USB device must support the FAT32 file type. The NTFS file type is NOT supported.
- On high speed ports 7 to 10 (5G or 10G), the minimal interface shaping rate is 3.6 Mbps.
- Cable testing when performed on ports 5 to 9 (multi-Gigabit ports):
- Cable status might display “Open at 140 meter” instead of a “good cable” when there is no cable or for cables shorter than 1 meter.
- Cable Length might display “Length > 140 Meters” for cables shorter than 5 meters.
Download Link : http://www.downloads.netgear.com/files/GDC/MS510TX/MS510TX_TXPP_V6.7.0.42.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
The released zip contains the switch firmware (MS510TX_MS510TXPP_V6.7.0.42.bin) and MIB files. Unzip the file to extract the switch image for firmware updating.
Last Updated:07/07/2025
|
Article ID: 000061557