Enhancement on 1.6.0.21:
- Added support for these new models: M4500-32C, M4500-48XF8C
- Added all newly supported operating systems (Server 2012 R2, Server 2016, Server 2019).
Bug Fixes:
- Can be installed on Windows 10 and Windows Server 2016.
- Shows all devices when browsing the NMS300 network summary.
Known Issues:
- Telnet to M4500 should be done over port 1223 instead of port 23. It's a custom port.
Firmware Update Instructions:
- There are 2 installers: one for 32-bit Windows OS, and another for 64-bit Windows OS. Download the appropriate zip file from the web site for either the 32-bit or 64-bit version of Windows.
- To run NMS300, the machine must be configured with a static IP address. The NMS300 is a server application that binds itself to the static IP address of the machine
Download Link:Win32 bit: http://www.downloads.netgear.com/files/GDC/NMS300/NMS300_V1.6.0.21(Win32).zip
Win64 bit: http://www.downloads.netgear.com/files/GDC/NMS300/NMS300_V1.6.0.21(Win64).zip
- Unzip the file to obtain the executable installer file.
- Double click on this executable to launch the installer and customize the settings.For instance, if another application is already using TCP port number 8080 on the Windows machine, then you can set this to a different port number.Also, if you have multiple NICs (Network Interface Cards) on your machine, make sure to choose the appropriate NIC in the NIC selection page in the wizard.
- Once the installer finishes the installation, NMS300 should be up and running as a service. There is no need to reboot the Windows server to start using NMS300.
- There is no need to enter a license key in order to get the NMS300 to start managing devices.
- In order to launch the NMS300 web GUI from the same machine where you installed NMS300, enter the URL http://localhost:8080 or the IP address of the PC server where NMS300 is installed. If a different port number is set for the web server during NMS300 installation, then make sure to replace 8080 in this URL with the port number provided during installation.
- To access the NMS300 web GUI from a remote machine, replace “localhost” with the IP address of the NMS300 machine.
- Make sure to clear your web browser’s cache prior to using the NMS300 web GUI. This will prevent you from encountering issues while using the web GUI of NMS300.
- Once you access the URL in a supported web browser, you will see the login page for NMS300 web GUI. The default user name is admin and the default password is admin
Last Updated:07/07/2025
|
Article ID: 000061426