Enterprise AV Home WiFi Mobile Wifi Support Shop Deals

Bug Fixes:

  • Upgrading firmware through the web UI or Nighthawk app sometimes fail.
  • When smart connect is enabled, the Nighthawk app is unable to change the 5 GHz security method under for the guest network.
  • Enabling Qos causes the system to reboot.
  • Wired client devices are unable to get the correct IP address when the VLAN is enabled. 
  • The Nighthawk app is unable to detect a connection when using PPPoE or static IP configurations.
  • The Nighthawk app is unable to launch when the WiFi SSID and password contain special characters. 
  • The WiFi disconnects. 
  • The Nighthawk app is not able to configure WiFi settings with no security. 
  • After enabling the FTP under ReadySHARE, the port forward rules disappear.
  • Unable to log in to the web UI after enabling the traffic meter
  • The Internet LED lights white instead of amber when no Internet connection detected.
  • The Connect and Disconnect buttons do not work when the Internet connection is in PPTP mode.
  • The speed test does not show a failure prompt when Internet is not detected. 
  • The system reboots when IPv6 is set to AutoDetect mode for Comcast ISP.
  • The system reboot when IPv6 is set to PPPoE mode.
  • The installation process is stuck at the "Detecting the Internet Connection" page when static IP is set.
  • Unable to change model name for devices under attached devices. 
  • Some web pages show “page not found” and a refresh is required.
  • The Nighthawk app shows a “router detected” page after rebooting the router using the app. 
  • The Nighthawk app is unable to show the Guest WiFi page if the Guest WiFi SSID or password contains special characters. 
  • The Nighthawk app does not show the correct number of characters for the SSID or password. 
  • Restoring the configuration fails during installation.
  • Fixes minor bugs.

Firmware Update Instructions:

Download Link: http://www.downloads.netgear.com/files/GDC/RAX20/RAX20-V1.0.0.36_1.0.19.zip

To update your router’s firmware, follow the instructions in your router’s user manual. To view your router’s user manual, visithttps://www.netgear.com/support/product/RAX20.aspx#docs.

Last Updated:07/07/2025 | Article ID: 000061397

This article applies to:

Recently Viewed Articles

    Our team is here to help!

    Phone
    Chat
    Email