New Features and Enhancements:
- Increased the password complexity.
- User must change the default password for compliance with new CA state law.
- Added UPnP support.
Known Issues:
- SSID of wireless station and master do not display on each other's attached device wireless station list pages.
Download Link : http://www.downloads.netgear.com/files/GDC/WAC104/WAC104-V1.0.4.12.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
- If AP is out of box with FW version lower than V1.0.4.1, please follow the Firmware update procedure before updating to V1.0.4.12.
- Backup configuration file -> Do factory defaults after upgrade -> Clear browser cache -> Access AP GUI using IP address -> Restore the configuration file to avoid configurations getting lost.
- If AP is operating with FW V1.0.4.1 already, update to the latest FW. All the configurations will be retained properly after successful update.
Notes:
- The AP’s default IP address is 192.168.0.100.
- From FW V1.0.4.8 and above, by doing factory default DHCP client is enabled by default and the default SSID will be secured with WPA/WPA2-PSK (Default SSID and passphrase is available at the back panel of the AP to connect wireless clients)
- AP can be accessed using the default IP address (192.168.0.100) when AP doesn’t get DHCP client IP address.
- AP can be accessible from wireless clients by giving “aplogin.net” in the browser URL when AP’s IP address is not known after it gets IP address from DHCP server.
- AP can be returned to factory defaults using the reset button at the back of the AP by pressing and holding the button for ~10 secs (Power LED will blink in green from solid green).
- In the following scenarios AP is expected to reboot automatically for the configuration to take effect:
a. Firmware upgrade
b. Reset factory defaults
c. Restore configuration
In all the other conditions AP is not supposed to reboot automatically.
Last Updated:07/07/2025
|
Article ID: 000061394