Applicable Models:
- M7100-24X(XSM7224)
New Features and Enhancements:
- Compliant with California Privacy Law: Force user to change the default password on first login to the device.
Known Issues:
- If the network is configured as DHCP mode on the previous version, after it upgrades to 11.0, the “network” interface protocol mode will change to ‘none’ and its IP will be set to ‘0.0.0.0’. And DHCP mode is enabled on management VLAN instead.
- M7100 will not support IPv6 management on management VLAN.
- The auto install is not allowed to apply a config file if the startup-config file contain the commands related to the “network” interface which is not supported on 11.0.
- If user configures the ports as protected port, routing mode is not allowed to configure on the VLAN in which those protected port are added.
- PVST/PVST+ in M7100 only supports VLAN ID range from 1 to 1024. If user enables the PVST, make sure all of VLAN IDs are in the range of 1 to 1024.
Firmware Update Instructions:
Download Link: http://www.downloads.netgear.com/files/GDC/M7100-24X/XSM7224_V11.0.0.40.zip
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000061367