Applicable Models:
- M4200-10MG-POE+(GSM4210P)
New Features and Enhancements:
- Compliant with California Privacy Law: Force user to change the default password on first login to the device.
- In the web GUI “LAG Configuration” page, replace "Active Ports" field with “Down Ports” for each LAG group to easily spot the offline member port
Bug Fixes:
- PoE task is running even though PoE is disabled
- Vulnerability alert: Linux DOS issue
- Management interface gets stuck in manual assignment if DHCP lease expires
- Setting multiple variables in a single SNMP set-request is not successful
- Unable to reset 'switch priority' and 'unit number' using 'erase stack-config'
- DUT should forwarding BPDU packet with VLAN tag when the port 802.1Q VLAN tag setting
- Switch won't let you bind more than 15 ACL
- Captive portal: When authenticate the client by dot1x and captive portal ,it gets an error "05 Method Not Allowed"
- Add two ACL show commands in techsupport file.
- Switch reboot randomly when there is only one port in the VLAN 1.
- Link Dependency does not work by upstream's linkdown event if upstream is linkdown by power-off
- When upstream Interface belongs to Master unit and power off Master unit, still does not work
- All ports cannot link up after reboot DUT with existing CoS and Datacenter Bridge config
- DUT crash when click neighbor information page with a long-length peer devices
- Stack crashed with the tasks bcmATP-RX, unitMgrTask and spmTask
- Random stack unit reboots, crash dumps present
- 1G BX transceivers not giving links though 10Gbs working with same brand/maker
- A crash issue in DHCP client task.
- Switch pointing to wrong next hop in route table, after removing vlan1 config
- Switch stuck in reboot loop after enabling openflow
- 1G BX transceivers not giving links though 10Gbs working with same brand/maker
- Reboot causes flood to daisy chain port
Known Issues:
- Loop Protect functionality does not work if igmpsnooping is enabled.
Download Link: http://www.downloads.netgear.com/files/GDC/M4200/GSM4210P_V12.0.2.36.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000061364