Enterprise AV Home WiFi Mobile Wifi Support Shop Deals
Change the LAN IP address settings for a LAN subnet

The router is preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The router’s LAN IP configuration for the default LAN subnet (LAN1) is as follows:

  • LAN IP address. 192.168.1.1 (this is the same as www.routerlogin.net)

  • Subnet mask. 255.255.255.0

  • VLAN ID. 1

These addresses are part of the designated private address range for use in private networks and are suitable for most applications. The IP address and subnet mask identify which addresses are local to a specific device and which must be reached through a gateway or router. If you need a specific IP subnet that one or more devices on the network use, or if competing subnets use the same IP scheme, you can change the LAN IP address settings for the default LAN subnet or add another LAN subnet. If you add another LAN subnet, you must use unique LAN IP address settings and a unique VLAN ID for that subnet.

If you change the default LAN IP address settings, the IP address range for the default DHCP server also changes.

To change the LAN IP address settings for a LAN subnet:

  1. Launch a web browser from a computer or mobile device that is connected to the router network.
  2. Enter https://www.routerlogin.net.

    Your browser might display a security message, which you can ignore.

    A login window opens.

  3. Enter the router user name and password.

    The user name is admin. The password is the one that you specified when you set up your router. If you didn’t change the password, enter password. The user name and password are case-sensitive.

    The Dashboard displays.

  4. Select BASIC > Setup > LAN Setup.

    The LAN Setup page displays for the default LAN subnet (LAN1).

  5. If you added another LAN subnet and want to change the IP address settings for that LAN subnet, click the tab for that LAN subnet.
  6. In the IP Address fields, enter the LAN IP address.

    If you change the IP address for the default LAN subnet (LAN1), the LAN IP address for the router changes.

  7. In the IP Subnet Mask fields, enter the LAN subnet mask.

    If you change the IP subnet mask for the default LAN subnet, the LAN IP subnet mask for the router changes.

  8. Click the Apply button.

    Your settings are saved.

    If you changed the LAN IP address settings of the default LAN subnet, you are disconnected from the local browser interface.

    To reconnect, close your browser, relaunch it, and log in to the router at its new LAN IP address.

Last Updated:07/07/2025 | Article ID: 000060898

This article applies to:

Recently Viewed Articles

    Our team is here to help!

    Phone
    Chat
    Email