To change your user interface back to English on your NETGEAR Nighthawk switch:
- Open a web browser from a computer that is connected to the same network as the switch or is connected to the switch directly through an Ethernet cable.
- Enter the IP address that is assigned to the switch.
If you do not know your switch’s IP address, you can also use the NETGEAR Switch Discovery Tool to open your switch’s web browser-based user interface. - Enter the switch password.
The default password is password. - On your switch’s home page, click the down arrow next to System Info to expand that section.
- From the Language drop-down menu, select English.
- Click Apply.
- In the confirmation dialog box, click Continue.
Your switch’s user interface changes back to English.
Last Updated:07/07/2025
|
Article ID: 000059703