How do I configure Spanning Tree Protocol (STP) in the Insight mobile app?

Configure Spanning Tree Using the Insight App

To configure Spanning Tree for a network location using the Insight app:

Launch the Insight app.
In the menu at the bottom, tap Networks.
Tap Wired Settings.
If you set up more than one network in Insight, at the top of the page, select the network for which you want to configure Spanning Tree.
Tap Spanning Tree (STP).
If the Spanning Tree settings do not display, tap the Enable button.
To select the Spanning Tree mode, do the following:
1. Tap Spanning Tree Mode.
2. Swipe up or down to select STP or RSTP.
3. Tap Done.
For each switch for which you want to configure Spanning Tree, in the graphic of the switch, tap the ports, LAGs, or both to enable Spanning Tree for them.
For each switch, tap Select All to select all ports on that switch. (After you tap Select All, the name changes to Deselect All.) Tap Deselect All for a switch to clear all selected ports on that switch.
Tap Save.
Your settings are saved.

Last Updated:07/07/2025 | Article ID: 000059574