New feature and modifications:
- Added “Auto” detection mode for language selection. With Auto mode, the switch will display English, German (Deutsch) and Japanese (日本語) automatically based on the language of the browser.
Notes:
- Firmware upgrade will fail if using web browser to perform the upgrade from v1.0.0.0. Please connect your computer with Plus Utility directly to your GSS116E and use Plus Utility to perform the upgrade.
- Firmware upgrade will fail if using web browser to perform the upgrade from v1.0.0.2 for the first time. Please upgrade the firmware again using the same web browser. Another method is to connect your computer with Plus Utility directly to your GSS116E and use Plus Utility to perform the upgrade.
- There was an issue with v1.0.0.0. VLANs. Link Aggression stops working when GSS116E is being booted up or when firmware is being upgraded from v1.0.0.0. The issue is fixed in v1.0.0.2 or newer versions.
- Once you upgrade your firmware to v1.6.0.5 or newer version, you will no longer be able to use the ProSAFE Plus Utility versions prior to v2.7.2 to manage your GSS116E Click Switch. You will need to download the latest ProSAFE Plus Utility from http://www.netgear.com/support/product/PCU
- After upgrade your GSS116E to firmware version V1.6.0.5 and if your device’s bootloader version is V1.0.0.0, you will be prompted to upgrade the bootloader after logging in to the device through web GUI.
Upgrade Procedure using the ProSAFE Plus Utility (Recommended):
- Download the zipped firmware V1.6.0.5 from the NETGEAR product support website and save it on your local PC. Unzip it to the file to extract the switch firmware image GSS116E_V1.6.0.5.bin and bootloader image GSS116E_LOADER_V1.0.0.5.bin.
Download Link: http://www.downloads.netgear.com/files/GDC/GSS116E/GSS116E_V1.6.0.5.zip
- Download the ProSAFE Plus Utility V2.7.2 (or later version) from http://www.netgear.com/support/product/PCU
- Decompress the ProSAFE_Plus_Utility_V2.7.2.zip (or later version)
- Install the ProSAFE Plus Utility by double-clicking the ProSAFE Plus Utility 2.7.2.exe (or later version).
- Connect your computer to the same network as your GSS116E switch.
- Double-click the ProSAFE Plus Utility icon. The configuration home page displays a list of Web Managed (Plus) Switches on the network.
Note: If you do not see your switch in the network list, click the REFRESH button or close and launch the ProSAFE Plus Utility again. You may also need to configure your computer’s security software to allow broadcast packets to pass through (to/from) your PC’s UDP ports 63321-63324. To allow this traffic, you can create a rule in your computer’s security software, or temporarily disable the firewall, antivirus programs, or all on the computer. If you temporarily disable any security services, be sure to re-enable those services when the firmware upgrade is completed. - Select the GSS116E switch that you want to upgrade the firmware on.
- When prompted, enter the password for the GSS116E switch in the password field.
The default password is password. - Select System > Maintenance > Firmware Upgrade.
The Firmware Upgrade page displays. - Click the BROWSE button to locate and select the firmware file GSS116E_V1.6.0.5.bin on your PC.
- Click the Apply button.
Warning: Do not interrupt the network connection while in progress. Do not disconnect the Ethernet cable or power off the unit until the process is complete. The update may take several minutes even though you may not see any activity on the screen. - When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.
- Once the new firmware is successfully loaded (onto the switch), your GSS116E will automatically reboot itself. Wait at least 1 minute for the reboot to complete.
- Open a web browser and enter the IP address of the GSS116E into the address bar and log in to the switch management GUI.
- If loader version is above V1.0.0.0, step 16~18 will be skipped.
- You are going to be prompted immediately to update the bootloader. Click the BROWSE button and select the new bootloader code “GSS116E_LOADER_V1.0.0.5.bin” from the location on your computer where you unzipped the firmware files.
- Click the APPLY button.
Warning: Do not interrupt the network connection while in progress. Do not disconnect the Ethernet cable or power off the unit until the process is complete. The update may take several minutes even though you may not see any activity on the screen. - When the new bootloader code is successfully loaded (onto the switch), your GSS116E will automatically reboot.
Last Updated:07/07/2025
|
Article ID: 000059135