Bug Fixes:
- Upgraded the LMS libraries to support TLS1.2.
- Fixed a condition where the wireless controller intermittently reboots when a large number of clients are connected to it.
Upgrade Matrix:
UPGRADE TO 2.5.0.46 FROM RECENT RELEASES
| Devices | Firmware Upgrade From below versions to 2.5.0.46 |
|---|---|
| WC7520 | 2.5.0.46 -> 2.5.0.47 |
| 2.5.0.45 -> 2.5.0.47 | |
| 2.5.0.43 -> 2.5.0.47 |
Upgrade procedure for Redundancy setup:
- First Upgrade the Secondary controller followed by the primary controller.
Upgrade procedure for stack setup:
- First Upgrade the Secondary controllers followed by the primary controller.
Upgrade procedure for Stacked and Redundancy setup:
- First Upgrade the Secondary controller followed by the secondary controllers and then primary controller.
UPGRADE TO 2.5.0.47 FROM STANDALONE AP FIRMWARE
The following table lists the minimum Standalone AP firmware version required before they can be discovered and converted to the Controller firmware. Customer has to upgrade to the same standalone AP firmware version, if they have to manage the AP in standalone mode.
| AP Model | Firmware Version |
|---|---|
| WNAP210 | 3.7.9.0 |
| WNAP320 | 3.7.9.0 |
| WNDAP350 | 3.7.9.0 |
| WNDAP360 | 3.7.9.0 |
Upgrade Instructions:
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is wc7520_2.5.0.47.bin
Download Link: http://www.downloads.netgear.com/files/GDC/WC7520/WC7520_V2.5.0.47.zip - Log into the WC7520
- Select Maintenance > Upgrade from the main/submenu.
- In the Firmware Upgrade section, select Local File and click Browse.
- Locate the downloaded file and click Apply.
- This will start the software upgrade to your WC7520. This may take some time. Do not interrupt the upgrade process. At the conclusion of the upgrade, your WC7520 will reboot.
- Do NOT interrupt the upgrade process until it is done.
- If you encounter any issues with the web interface of the system following the upgrade then please clear your browser cache, restart your browser and try again.
WARNING: Stack users ! READ before upgrading
- When using Stacking setup, there is no issues if you have same password on Stack primary and secondaries.
- If there is different passwords on Primary and Secondary, First destack, change the password on primary and secondaries to same password and stack back.
- Now upgrade.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page