How do I modify an existing SNMPv1 or SNMPv2 community on my NETGEAR GS728TPv2, GS728TPPv2, GS752TPv2, or GS752TPP switch?

To modify an existing SNMP community:

Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable.
Launch a web browser.
In the address field of your web browser, enter the IP address of the switch.
The login window opens.
Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
Select System > SNMP > SNMP V1/V2 > Community Configuration.
The Community Configuration page displays.
Select the check box next to the community.
Update the desired fields.
Click the Apply button.
Your settings are saved.

For more information, see the following knowledge base articles:

Last Updated:07/07/2025 | Article ID: 000058227

Read this article in another language:

Read this article in another language: