Issues Fixed:
- Unable to perform firmware update successfully when using device running Android 7.1.1.
Upgrade Procedure:
- Download the new firmware 1.0.0.2 from the NETGEAR product support Website and store it on a local PC, remembering its location in the PC’s file system. Unzip it to get the switch firmware image GS908E_V1.0.0.2.bin.
Download Link : http://www.downloads.netgear.com/files/GDC/GS908E/GS908E_V1.0.0.2.zip
- HTTP is the only method to update the new firmware from the PC to the switch. Below are the steps to update the firmware.
- a. Go to GUI page Advanced Settings > Firmware.
- Click the file folder icon, then locate and select the new firmware image file GS908E_V1.0.0.2.bin.
- Click the Apply button.
- When the update is complete, your switch restarts. The update process typically takes about one minute.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the update. For example, do not turn off the switch or disconnect it.
Last Updated:07/07/2025
|
Article ID: 000049850