WAC505 and WAC510 Wireless Access Points meet IEEE 802.3af and IEEE 802.3at Power over Ethernet (PoE) specifications. If you are connecting your WAC505 or WAC510 to a PoE switch, you do not need an additional power source.
If the Power LED on your WAC505 or WAC510 alternates between green and amber, your PoE switch might be overloaded. If your switch is overloaded, you must use a power adapter or PoE injector to power your access point.
If you do not have a PoE switch or if your PoE switch is overloaded, you can purchase an optional 12 volt DC, 2.5 amp power adapter or a PoE injector from your NETGEAR retailer.
See the following list for power adapter SKUs:
- PAV12V - 100AUS (Australia)
- PAV12V - 100EUS (Europe, except UK)
- PAV12V - 100NAS (North America)
- PAV12V - 100PRS (China)
- PAV12V - 100UKS (UK)
Last Updated:07/07/2025
|
Article ID: 000048449