New Features and Enhancements:
- Initial Release
Known Issues:
- Number of configured IPv6 routes is displayed incorrectly
[Workaround]: Please count the listed static routes in the table.
- Combo port could failed to linkup with Intel NIC X520 and X710 after multiple unplug/re-plug.
[Workaround]: Reboot the device.
Notes:
- The released zip contains switch firmware (xs7xxt-v6.6.3.2.stk) and MIB files. Please unzip the file to extract the switch image for firmware upgrade.
- Switch FAN will run at maximum speed during the boot stage (for about 2 minutes) after power cycle; then the speed will change based on its internal device temperature.
- The USB storage device that you attach to the USB port must comply with the following requirements:
- The USB device must support USB 2.0.
- The USB device must support the FAT32 or VFAT file system. The NTFS file system is not supported.
Upgrade Procedure:
- Download the new firmware 6.6.3.2 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Then unzip it to get the switch image “xs7xxtv6.6.3.2.stk”.
Download Link: http://www.downloads.netgear.com/files/GDC/XS712Tv2/XS712T_V6.6.3.2.zip
Last Updated:07/07/2025
|
Article ID: 000047405