Link Status LED
This LED indicates the WiFi connection between the extender and the router.
- Solid white. Best connection.
- Solid amber. Good connection.
- Solid red. Poor connection.
- Off. No connection.
- Blinking white. The extender is resetting to its factory default settings.
Maximum Throughput LED
- Solid white. The extender uses the 5 GHz WiFi band for backhaul.
- Off. The extender uses the 2.4 GHz WiFi band for backhaul.
- Blinking white. The extender is resetting to its factory default settings.
2.4 GHz and 5 GHz LEDs
- Solid white. The 2.4 GHz or 5 GHz radio is operating.
- Off. The 2.4 GHz or 5 GHz radio is off.
- Blinking white (5 GHz LED only). The extender is resetting to its factory default settings.
Client Link LED
- Solid white. The extender is connected to a WiFi-enabled computer or mobile device.
- Off. The extender is not connected to a WiFi-enabled computer or mobile device.
USB LED
- Solid white. A USB device is connected to the extender.
WPS LED
- Blinking white. The extender is attempting to connect with a router or a WSP-enabled device.
- Solid white. The extender is connected to a router or a WPS-enabled device.
- Off. WPS on the extender is disabled.
Ethernet LED
- Solid white. An Ethernet device is connected to an Ethernet port.
Last Updated:07/07/2025
|
Article ID: 000045267