New Features and Enhancements:
- Added a Switch Management Mode on the Web GUI to allow user to choose to manage the switch from Web browser only or from both Web browser and Plus Utility.
Modifications:
- Fixed the vulnerabilities of cross-site Scripting (XSS) and cross-site request forgery (CSRF) attacks.
- Implemented more secured encryption algorithm to work with new version of Plus Utility (V2.4.3 or higher).
- Fixed the issue where the fragmented packets cannot be forwarded.
WARNING:
After XS708Ev2 is upgraded to FW version V1.0.0.15 or higher, it cannot work with Plus Utility version prior to V2.4.3. Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU
Upgarde Procedure:
- Download the new firmware 1.0.0.15 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Unzip it to get the switch firmware image “XS708Ev2_FW_v1.0.0.15.flash”.
Download Link: http://www.downloads.netgear.com/files/GDC/XS708Ev2/XS708Ev2_V1.0.0.15.zip - There are two methods to upgrade the new firmware from PC to the switch.
- HTTP
- ProSAFE Plus Utility
- To use HTTP method, go to GUI page “Maintenance > Firmware Upgrade".
- Click the Browse button and locate and select the new firmware image file “XS708Ev2_FW_v1.0.0.15.flash”.
- Click the Apply button.
- When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the upgrade. For example, do not turn off the switch or disconnect it.
Last Updated:10/17/2025
|
Article ID: 000037845