You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least seven seconds. The router resets and returns to the factory configuration settings shown in the following table.
| Feature | Default Behavior | |
| Router login | User login URL | www.routerlogin.com or www.routerlogin.net |
| User name (case-sensitive) | admin | |
| Login password (case-sensitive | password | |
| Internet Connection | WAN MAC address | Use default hardware address |
| WAN MTU size | 1500 | |
| Port speed | AutoSensing | |
| Local Network (LAN) | LAN IP | 192.168.1.1 |
| Subnet mask | 255.255.255.0 | |
| DHCP server | Enabled | |
| DHCP range | 192.168.1.2 to 192.168.1.254 | |
| Time zone | Pacific time | |
| DHCP starting IP address | 192.168.1.2 | |
| DHCP ending IP address | 192.168.1.254 | |
| DMZ | Disabled | |
| Time zone | GMT for WW except NA and GR, GMT+1 for GR, GMT- 8 for NA | |
| Time zone adjusted for daylight saving time | Disabled | |
| SNMP | Disabled | |
| Firewall | Inbound (communications coming in from the Internet) | Disabled (except traffic on port 80, the HTTP port) |
| Outbound (communications going out to the Internet) | Enabled (all) | |
| Source MAC filtering | Disabled | |
| Wireless | Wireless communication | See router label |
| SSID name | admin | |
| Security | WPA2-PSK (AES) | |
| Broadcast SSID | Enabled | |
| Transmission speed | Auto* | |
| Country/region | United States in the US; otherwise, varies by region | |
| RF channel | Auto for 2.4GHz, CH 44 for 5GHz- 1, and CH 153 for 5GHz-2 | |
| Operating mode | Up to 600 Mbps at 2.4 GHz, 1300 Mbps at 5 GHz | |
*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate
Last Updated:07/07/2025
|
Article ID: 25336