Enterprise AV Home WiFi Mobile Wifi Support Shop Deals
  1. Create VLAN 200.
    1. Select Switching > VLAN > Basic > VLAN Configuration.

      A screen similar to the following displays.

      Image
       
    2. In the VLAN ID field, enter 200.
    3. In the VLAN Type field, select Static.
    4. Click Add.
       
  2. Add ports to VLAN 200.
    1. Select Switching > VLAN > Advanced > VLAN Membership.

      A screen similar to the following displays.

      Image
       
    2. In the VLAN ID field, select 200.
    3. Click Unit 1. The ports display.
    4. Click the gray boxes under ports 4, 5, and 6 until U displays.

      The U specifies that the egress packet is untagged for the port.
    5. Click Apply.
       
  3. Specify the PVID on ports 1/0/4, 1/0/5 and 1/0/6.
    1. Select Switching > VLAN > Advanced > Port PVID Configuration.

      A screen similar to the following displays.

      Image
       
    2. Scroll down and select the Interface 1/0/4, 1/0/5, and 1/0/6 check boxes.
    3. In the PVID (1 to 4093) field, enter 200.
    4. Click Apply to save the settings.
       
  4. Enable DHCP L2 relay on VLAN 200.
    1. Select System > Services > DHCP L2 Relay > DHCP L2 Relay Configuration.

      A screen similar to the following displays.

      Image
       
    2. For Admin Mode, select the Enable radio button.
    3. Scroll down and select the VLAN ID 200 check box.
    4. Enter the following information:
      • In the Admin Mode field, select Enable.
      • In the Circuit ID Mode field, select Enable.
      • In the Remote ID String field, enter rmt_id.
    5. Click Apply to save the settings.
       
  5. Enable DHCP L2 Relay on interfaces 1/0/4,1/0/5, and 1/0/6.
    1. Select System > Services > DHCP L2 Relay > DHCP L2 Relay Interface Configuration.

      A screen similar to the following displays.

      Image
       
    2. Scroll down and select the 1/0/4, 1/0/5, and 1/0/6 check boxes.
    3. In the Admin Mode field, select Enable.
    4. Click Apply to save the settings.
       
  6. Enable DHCP L2 relay trust on interface 1/0/6.
    1. Select System > Services > DHCP L2 Relay > DHCP L2 Relay Interface Configuration.

      A screen similar to the following displays.

      Image
       
    2. Under DHCP L2 Relay Configuration, scroll down and select the Interface 1/0/6 check box.
    3. In the 82 Option Trust Mode field, select Enable.
    4. Click Apply to save the settings.


For more information, see the following support articles:

 

 

This article applies to the following managed switches and their respective firmware:

 

 

  • M5300 - firmware version 10.0.0.x
    • M5300-28G (GSM7228S)
    • M5300-5G (GSM7252S)
    • M5300-28G3 (GSM7328Sv2h2)
    • M5300-52G3 (GSM7352Sv2h2)
    • M5300-28G_POE+ (GSM7228PSv1h2)
    • M5300-52G-POE+ (GSM7252PSv1h2)
    • M5300-28GF3 (GSM7328FSv2)
  • M4100 - firmware version 10.0.1.x
    • M4100-26G (GSM7224v2h2)
    • M4100-50G (GSM7248v2h2)
    • M4100-26G-POE (GSM7226Pv1h1)
    • M4100-50G-POE+ (GSM7248Pv1h1)
    • M4100-26G-POE (FSM7226Pv1h1)
    • M4100-50-POE (FSM7250Pv1h1)
    • M4100-D12G (GSM5212v1h1)
    • M4100-D10-POE (FSM5210Pv1h1)
  • M7100 - firmware version 10.0.1.x
    • M7100-24X (XSM7224)
  • XSM7224S - firmware version 9.0.1.x
Last Updated:07/07/2025 | Article ID: 21986

This article applies to:

Recently Viewed Articles

    Read this article in another language:

    Read this article in another language:

    Our team is here to help!

    Phone
    Chat
    Email